Artemide Funivia Vector Pendant suspension lamp

Product Information:

Funivia by Carlotta de Bevilacqua for Artemide is designed for the cooperation between elements. The essential "mountaineering" spirit of this mesh will allow new light to be discovered in spaces, indeed, in any space. The rope carries energy while cubes for the wall or ceiling, deviators and tensioners are elements designed for fixing, for the base that only aims to go far. The cable supports various mechanical tensions and thermal stresses: starting from the cube, it distributes the energy of the entire system and is the pivotal point where each light source comes to life and connects. The cable also does not need to be cut, in fact clips are included to be able to shorten the wire as desired. The architecture that can be drawn will go from horizontal to vertical and oblique, to run endlessly in three dimensions.

Each element added to the cable will be "tied" through a bridge-element, a sort of current-stealing padlock that mechanically secures the source and draws energy from the cable to power it directly. Vector Pendant is available in the three dimensions Vector 30, 40 or 55 and in the two finishes White or Black. Its height varies from a minimum of 500 mm to 1200 mm. Convenient and functional, controllable and dimmable through the management of the Artemide App (or Push on request) both on a single individual source and on all the sources placed on the cable, simultaneously.

Funivia breaks every pattern of common lighting systems and focuses on sustainable principles in terms of production, distribution, consumption, installation and use, integration. Perfect for commercial venues, showrooms, offices and conference rooms, large spaces but also small ones such as contemporary residences.

• For indoor: IP20
• Materials: Metal
• Integrated LED
• Voltage: 230V
• Dimmable - Artemide app
• Light emission: Direct
• Color temperature: 3000K
• Height: min 500 / max 1200 mm

Vector Pendant 30

• Source: 7W LEDs
• Light beam: 16° - Available on request 12° or 30° 
• Luminous flux: 335 lm
• Dimensions: Ø 30x78x136 mm

Vector Pendant 40

• Source: 10W LEDs
• Light beam: 21° - Available on request 14° or 28°
• Luminous flux: 584 lm
• Dimensions: Ø 40x104.5x136 mm

Vector Pendant 55

• Source: 23W LEDs
• Light beam: 22° - Available on request 15° or 31°
• Luminous flux: 1721 lm
• Dimensions: Ø 55x131.5x136 mm

Artemide APP

ATTENTION: 2700K or 4000K color temperatures and different light beams available on request. Write in the notes when ordering.

STARTER PACK REQUIRED FOR SOURCE TO OPERATE.