Flos A-Round 150 Adjustable Recessed Ground Spotlight For Outdoor IP67

Product Information:

External ring in AISI 316L stainless steel treated with PVD (Physical Vapor Deposition) process. Thanks to this innovative treatment, the surfaces of the A-Round are covered with a thin film of metals such as zirconium and titanium which, when combined with steel at the molecular level, increase the characteristics of both mechanical and atmospheric agents resistance, allowing the creation of precious and durable finishes. Luminaire body made of die-cast EN AB-47100 aluminum with low copper content, coated with a double layer of high corrosion resistance paint. High-strength tempered transparent glass, silk-screened to reduce glare. Driver for remote installation included, supplied with watertight M12 quick coupling connector. Installation requires a recessed formwork, to be ordered separately. Adequate gravel level (> 300 mm) must be ensured or a drainage system must be provided to ensure drainage and prevent water stagnation. To ensure the tightness of the cable gland it is necessary to use flexible electrical cables suitable for use in outdoor environments. Integrated 110 / 240V power supply. Formwork required, to be ordered separately. Dimmable version on request. Adjustability on the horizontal axis: max 15 °. Rotation around the vertical axis: max 359 °.

Main specifications Category

• led lamp
• Power (W): 8 CCT
• (K): 4000K
• CRI: 80
• Net lumens (lm): 479
• Supports: Ground recessed
• Environment: for outdoors
• Optics Type of lighting: Direct
• LED type: Power LED
• Light distribution: Symmetric
• Optic type: Flood down
• Beam angle (°): 14 - 25 - 64
• Beam angle C90-270 (°): 14 - 25 - 64
• Electrical Frequency (Hz): 50-60
• Voltage (V): 110-240
• Driver: remote included
• Driver type: not dimmable
• Insulation class: II
• Physical Color: Copper, Bronze, Gold, Stainless
• Orientation: orientable Rotation (°): 359

Notes: It is recommended to use a connection system with a degree of protection greater than or equal to the degree of protection of the device. During the assembly and maintenance of the devices, special care must be taken not to damage the powder coating. Combined damage to the action of water could cause corrosion. Chemicals damage the corrosion protection. LED luminaires can show faults attributable to electrical stresses affecting the relative insulation with triggering of destructive electrical discharges. These stresses may arise from: . overvoltages from the power supply network of the system / equipment. . overvoltages of electrostatic origin (ESD) from the environment. We recommend the installation of a surge protection device on the electrical system that attenuates the intensity of some of these phenomena, protecting the devices from irreversible damage. The choice of the most suitable device must be calibrated based on the characteristics of the system.