- On sale!
- Discount from
8%

ZERO TRACK electro-mechanical 24V surface profile for ceiling or wall installation, for indoor use. Made of painted aluminum in 5 different finishes. Connectors must be ordered separately together with all accessories.
See the diagram in the images for installation examples.
Read more ...Innovative 24V system, composed of an extremely miniaturized guide that adapts subtly to the surface. It can be integrated into any type of ceiling or wall, with a wide range of adjustable fixtures, including the Atom collections by Piero Lissoni and Find Me by Jorge Herrera. The Zero Track binary can look like a recessed luminaire that blends and integrates perfectly with any architectural structure.
Indoor electro-mechanical profile for surface installation on ceiling or wall. Available in 1000mm or 2000mm lengths. The power connector, the intermediate connectors and the caps must be ordered separately (see Installation Accessories). Coplanar angular mechanical connectors available that can be moved at 90° and curved (symmetrical element from left to right), 90° angular connectors with height change (wall-ceiling or ceiling-wall), and "T" and "X" connectors. Coplanar 90° and curved connection elements available. For vertical installations it is necessary to install the stopper, to be ordered separately. For non-accessible ceiling solutions, the system is supplied with dimmable power sources, with 1-10V broadcast control system. Dimmable remote power supply available with 1/10V and DALI. Surface power unit available with 1/10V protocol.
Power Supply Unit - The track system can be powered by a remote source NOT INCLUDED or with the power supply equipment to be plugged into the track, supplied with an adjustable power source. The initial power connector has space for cable entry at both the top and side. The power connector, the intermediate power supply and the 90° angle elements can only be fed from the rear. The maximum track length with the same driver is 10 meters. Dimmable drivers with PWM voltage output should be used at frequencies between 250 and 500Hz.
See diagram in the images for surface or remote driver installation examples.
Compatible OPTICAL SYSTEMS
Optical systems and all connection elements must be ordered separately. See ASSEMBLY ACCESSORIES.
Reference: 127821
Electronic power supply 60W in 24Volt in direct current for LED strips and modules. For indoor use
Reference: PWM-120-24DA2
Power supply unit for LED, Mean Well model PWM-120-24DA with output power of 120W 5A and constant voltage of 24Volt. Degree of protection IP67. Dimmable via Dali and Dali system 2. Flos code: 60.9682
Reference: 06.2540.40
Live end 24V feed unit for remote power supply, compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 06.2541.40
Intermediate 24V linear feed connector, compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 06.2506.40
Linear external corner intermediate connector, compatible with Zero Track profile. Available in 2 different finishes. See the diagram in the images for installation examples.
Reference: 06.2542.40
Flat 90° angle, compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 06.2543.40
Inner corner ceiling/wall - wall/wall, compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 06.2544.40
Ceiling/ceiling - wall/wall inner curve, compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 06.2545.40
T-shaped feed connector, compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 06.2546.40
X-shaped feed connector, compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 06.2509.40
End cap compatible with Zero Track profile. Available in 4 different finishes. See the diagram in the images for installation examples.
Reference: 08.0630.40
Stopper for fixing on vertical guides, compatible with Zero Track profile. Available in 2 different finishes. See the diagram in the images for installation examples.
Reference: 06.2510.40
End track power supply with 1/10V or non-dimmable protocol for surface installation, compatible with Zero Track profile. Available in 5 different finishes. See the diagram in the images for installation examples. Only available while supplies last.
Reference: 06.2511.14
Middle power supply with 1/10V or non-dimmable protocol for surface installation, compatible with Zero Track profile. Available in 5 different finishes. See the diagram in the images for installation examples. Only available while supplies last.
Be the first to ask a question about this product!
Reference: 06.6000.14
THE MICRO RUNNING MAGNET - 24V recessed electromechanical profile with very small dimensions, for ceiling or plasterboard wall installation. Available in three different lengths. See the diagram in the images for installation examples. Accessories NOT included.
Reference: 06.6010.40
THE MICRO RUNNING MAGNET - 24V surface electromechanical profile with very small dimensions, for ceiling or wall installation. Available in three different lengths. See the diagram in the images for installation examples. Accessories NOT included.
Reference: 06.0330.C5
MY CIRCUIT flexible 48V electromechanical profile for ceiling installation, available in three lengths. Accessories and light fixtures must be ordered separately. See description for full specifications.
Reference: 08.8720.30
Flos Light Cut Mini - Profiles KIT 2 units. Aluminum profiles for Channel 70 and Channel 140 installation, to be integrated into plasterboard ceilings. Available in two lengths and two finishes.
Reference: 08.8701.30
Flos Light Cut Mini - Profiles KIT 1 unit. Aluminum profiles for Perimetral installation, to be integrated into plasterboard ceilings. Available in two lengths and two finishes.