

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through DALI or Push system with the use of a simple NA (Normally Open) button.
Read more ...Dimmable LED Controlgear Driver DALI & Push
. Driver for independent mounting - IP20 - Insulation class II
. Output in steady voltage 24VDC
. A40PDCVD000B: DALI or Push-Button on the primary side
. Self-resetting protection against overtemperatures, open circuit and against output short circuits
. Input voltage: 100V-250V/AC - Steady output
Be the first to ask a question about this product!
Reference: A40PDCV1000B
PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.
Reference: A40DALI1000B
Brightness regulator with DALI/1-10V potentiometer or button control, 12-24V VDC power supply (12A max) for LED strips and modules.
Reference: A40DALI1103B
Brightness controller with control DALI or 1..10V with low voltage push, For resistive loads up to 12A, Input 12V-24V/DC, Dimensions 138x40x28,5 mm,
Reference: A40WALLCT00N
Wall touch control unit, with color temperature management function from warm white to cold white. To combine with the radio remote control receiver (A40RC433CT0N) to control strips or LED modules at 12V or 24V. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.
Reference: A40WALLDIMON
Wall touch control unit, with dimmer light management function. To be combined with the receiver remote control (A40RC433DIMN) for brightness control of LED strips or 12V or 24V modules. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.
Reference: A40KITDIM
Interface kit and 433 Mhz radio control for dimmer brightness adjustment, ideal for 12-24 Volt DC LED modules or strips. Complete with receiver radio control included in the kit. With a maximum power output of 120W at 12V and 240W at 24V. The kit consists of the following codes: A40RC433DIMN + A40PDL43DIMB
Reference: FC22865
Nominal power 22 W, Average duration 12,000 hours, Attack: 2GX13 (4-Pins), Characteristic luminous flux 1710 lm, Color temperature 6500K Cool light, Tube diameter 16 mm, Diameter dimensions: 225 mm, CRI Ra> 80.
Reference: F016Z000000
Installation formwork accessory. For Caule Bollard lamps.
Reference: 536X
Power cable with dimmable button for Pipistrello lamps. See below for compatibility. Power supply not included.