QLT Dimmer LED Driver Dali Dimmable 1-10V 144-288W for Strip LED

Reference: A40DALI1103B

QLT

Brightness controller with control DALI or 1..10V with low voltage push, For resistive loads up to 12A, Input 12V-24V/DC, Dimensions 138x40x28,5 mm,

Reference: A40KITDIM

QLT

Interface kit and 433 Mhz radio control for dimmer brightness adjustment, ideal for 12-24 Volt DC LED modules or strips. Complete with receiver radio control included in the kit. With a maximum power output of 120W at 12V and 240W at 24V. The kit consists of the following codes: A40RC433DIMN + A40PDL43DIMB

Reference: A40WALLCT00N

QLT

Wall touch control unit, with color temperature management function from warm white to cold white. To combine with the radio remote control receiver (A40RC433CT0N) to control strips or LED modules at 12V or 24V. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.

Reference: A40WALLDIMON

QLT

Wall touch control unit, with dimmer light management function. To be combined with the receiver remote control (A40RC433DIMN) for brightness control of LED strips or 12V or 24V modules. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.

Reference: A40WALLRGB0N

QLT

Wall touch control unit, with dimmer function to adjust the light intensity. To be combined with the receiver remote radio control (A40RC433RGBN) for brightness control of 12V or 24V strips or modules LEDs. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.

Reference: A40PDCV1000B

QLT

PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.