- On sale!
- Pack

Interface kit and 433 Mhz radio control for dimmer brightness adjustment, ideal for 12-24 Volt DC LED modules or strips. Complete with receiver radio control included in the kit. With a maximum power output of 120W at 12V and 240W at 24V. The kit consists of the following codes: A40RC433DIMN + A40PDL43DIMB
Read more ...433 Mhz Dimmer Remote Control + 433 Mhz radio control unit with Dimmer output, the controller has 3 outputs of 3.33A each controlled by the supplied remote control.
Radio controlled Interface 433 Mhz Dimmer features:
Radio Transmitter 433 Mhz Dimmer features:
Reference: A40PWMREP00B
Amplifier PWMR or signal repeater for control unit with RGB, dimmer or color temperature signal. With a maximum output power of 288W at 12V and 576W at 24V.
Be the first to ask a question about this product!
Reference: A40DALI1000B
Brightness regulator with DALI/1-10V potentiometer or button control, 12-24V VDC power supply (12A max) for LED strips and modules.
Reference: A40DALI1103B
Brightness controller with control DALI or 1..10V with low voltage push, For resistive loads up to 12A, Input 12V-24V/DC, Dimensions 138x40x28,5 mm,
Reference: A40WALLCT00N
Wall touch control unit, with color temperature management function from warm white to cold white. To combine with the radio remote control receiver (A40RC433CT0N) to control strips or LED modules at 12V or 24V. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.
Reference: A40WALLDIMON
Wall touch control unit, with dimmer light management function. To be combined with the receiver remote control (A40RC433DIMN) for brightness control of LED strips or 12V or 24V modules. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.
Reference: A40WALLRGB0N
Wall touch control unit, with dimmer function to adjust the light intensity. To be combined with the receiver remote radio control (A40RC433RGBN) for brightness control of 12V or 24V strips or modules LEDs. With a consumption of 0.4W (sleep) / 1.5W (action) output at 433 MHz.
Reference: A40PDCV1000B
PDCV driver power supply for LEDs with constant voltage at 24V for a maximum of 13W (230V) and 10W (110V). Possibility to adjust the light intensity through 1-10V system with the use of a simple NA (Normally Open) button. Ideal for strips and LED modules.