- On sale!
- Discount from
75%

Electronic ballast for discharge lamps, independent use with double terminal cover, with Wieland (ST-18) connector 220-240V 50 / 60Hz, for 1x35W or 1x70W metal halide lamp.
Read more .... Electronic ballast for independent use, class I.
. It can be used for lighting equipment in protection class I and II.
. Degree of protection: IP20.
. Energy efficiency: A2.
. Allowed load capacity: 20 - 120 pF.
. Maximum cable length for connecting the lamp: 1 m.
. Operating frequency: 173 Hz.
. Input and output terminal blocks on the same side with push-wire connections lever opening 0,75 - 2,5 mm2.
. Ballast can be secured through slots for screws M4.
. Shielded against radio interference.
. 50% increase on the life of the lamp.
. Energy saving up to 25% compared to the use of conventional ballasts.
. The electronic ballast has to be wired with silicone double insulation cable with core suitable for 5 kV pulse.
. Protection against overvoltage.
. Protection against disconnection of the lamp.
. Protection against lamp failure.
. Protection in case of lamp end of life.
Code: 183245 - EPC 35/2 Socket (35 W) : G12 - PG12-2 - G8,5 - E27 - EAN 8010703250178
Code: 183246 - EPC 70/2 Socket (70 W): G12 - RX7s - PG12-2 - G8,5 - E27 - EAN 8010703250185
Be the first to ask a question about this product!
Reference: 137989TC
Multi-lamp and multi-power mini electronic ballast for independent use TCI for fluorescent lamps from 2x14 to 2x24 watts.
Reference: 137997/239
Multi-lamp multi-power linear electronic ballast TCI for fluorescent lamps 2x39W 2x24-36-38W
Reference: 137962/242
TCI multi-lamp ballast and MBQ 242/2 electronic power for lamp 1 / 2x26 1 / 2x26-32 1 / 2x42 1x57 1x70 1x22 + 1x40 1 / 2x22-40 for independent use for fluorescent lamps. The product does not include the cable cover, as shown in the photo.
Reference: 183040EI
Electronic superimposed igniter, with built-in timer. Rated voltage 220-240V and power 70-400W. Available in two variants.
Reference: 183047
Ferromagnetic ballasts for 400W HS and HI lamps. Dimensions: 75x72x165 mm For high pressure sodium lamps (HS) and metal halide lamps (HI).
Reference: MB118/2
TCI Mini electronic ballast for 1x18W lamp bulb for independent use of fluorescent lamps. For bindings: G24d-2 - GX24d-2 Lamps: TC-D - TC-T