

Nominal voltage: 220-240V
Dimensions 110x52x22 mm
Features
. Multipower driver supplied with dip-switch for the selection of the output current.
. IP20 independent driver, for indoor use .
. Class II protection against electric shock for direct or indirect contact.
. It can be used for lighting equipment in protection class I and II .
. Active Power Factor Corrector.
. Current regulation ±5 % including temperature variations.
. Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm2 / AWG15).
. Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Thermal protection = C.5.a.
Dip-switch selection of the output constant current Variants:
12W 15...48V max 250 mA cost.
14W 15...48V max 300 mA cost.
17W 10...48V max 350 mA cost.
19W 5...48V max 400 mA cost.
20W 5...44V max 450 mA cost.
20W 5...40V max 500 mA cost.
20W 5...36V max 550 mA cost.
20W 5...33V max 600 mA cost.
20W 5...31V max 650 mA cost.
20W 5...29V max 700 mA cost.
20W 5...27V max 750 mA cost.
20W 5...25V max 800 mA cost.
20W 5...23V max 850 mA cost.
20W 5...22V max 900 mA cost.
20W 24V cost. 900 mA max
11W 12V cost. 830 mA max
Reference: 162110
Recessed rotary dimmer available for different recessed series suitable for regulating dimmable LED bulbs of the best brands on the market.
Be the first to ask a question about this product!
Reference: 141092
Electronic power supply 12W in direct current 250mA (10W) or 350mA. IP20 independent power supply, for indoor use. Nominal voltage 220-240V. Dimensions: 70x41x19 mm.
Reference: 127016
Multipower electronic LED driver PUSH dimmable DC
Reference: 122262
TCI DC JOLLY MD LC multipower driver 7,2-24W 150-500 mA dimmable with igbt/triac system, mains dimming trailing edge/leading edge. Dimensions: 166X46X34mm
Reference: 127571
Electronic 220-240V power supply of small dimensions adjustable in direct current with DIP-SWITCH for the selection of the direct current in output.Output current from 125mA to 500mA.
Reference: 122201
Adjustable electronic ballast with DIP-SWITCH. Operating mode in constant current from 250 to 700mA or constant voltage 24 Volt.
Reference: 122203
Multi-power TCI electronic power supply from 100mA to 380mA, or 24V constant voltage adjustable with DIP-SWITCH.
Reference: SCA60SENS827S1
Osram Parathom Led 9W bulb complete with daylight sensor. With a luminous efficiency 806 lumens in 2700K warm light and E27 screw attachment. Comparable to a 60W halogen bulb. Opal reflector. Dimensions: 112x60mm. Duration up to 25,000 hours of use.
Reference: LD0340B3
Poldina PRO lamp in the version equipped with a wireless contact charging base. Micro USB charger and contact charging base included. NEW VERSIONS 2025 BLACK AND CRAQUELÉ FINISHES.