- On sale!
- Discount from
25%

Nominal voltage: 220-240V
Features
. Possibility to choose the output current through short circuit on the appropriate terminal block.
. Driver for built-in use.
. It can be used for lighting equipment in protection class I and II.
. Push-wire connections (wire cross-section up to 0,5 - 1,5 mm2 / AWG20 - AWG15).
. Input and output terminal blocks on opposite sides.
. Single terminal block at the primary and secondary circuit (wire cross-section up to 1,5 mm2 / AWG15).
. Driver can be secured with slot for screws.
. Ultra compact size.
. Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads.
. Current regulation -6% +5% including temperature variations.
Be the first to ask a question about this product!
Reference: 127016
Multipower electronic LED driver PUSH dimmable DC
Reference: 127556
Electronic power supply adjustable from 250mA to 900mA in constant current and 12V-24V constant voltage. Multipower supply equipped with dip-switch with the selection of the output current. IP20 independent for indoor use. Dimmable through IGBT-TRIAC (TRAILING EDGE-LEADING EDGE) system.
Reference: 122262
TCI DC JOLLY MD LC multipower driver 7,2-24W 150-500 mA dimmable with igbt/triac system, mains dimming trailing edge/leading edge. Dimensions: 166X46X34mm
Reference: 127571
Electronic 220-240V power supply of small dimensions adjustable in direct current with DIP-SWITCH for the selection of the direct current in output.Output current from 125mA to 500mA.
Reference: 122201
Adjustable electronic ballast with DIP-SWITCH. Operating mode in constant current from 250 to 700mA or constant voltage 24 Volt.
Reference: 122203
Multi-power TCI electronic power supply from 100mA to 380mA, or 24V constant voltage adjustable with DIP-SWITCH.