- On sale!
- Discount from
25%

Universal flush-mounted regulator with separate push button. It can control: halogen and incandescent lamps, electronic transformers, LED Driver DIM, dimmable LED lamps (with Trailing edge technology - IGBT)
Read more ...Suitable for the regulation of dimmable LED bulbs of the best brands on the market (the applicable power is equal to a minimum of 4W to a maximum of 100W up to 10 bulbs) and classic halogen lamps (power from 4W to 250W). 10 bulbs max is the number guaranteed and verified by TCI, there is no construction standard for LED lamps therefore the device could work correctly even with a higher number, 15 - 20, after checking the TCI technical office. Download the pdf for more information.
General characteristics
- Installation in junction boxes.
- Multi-point adjustment by means of normally open buttons without built-in indicator light, of any series.
- Absence of acoustic hum.
- Electronic protection against overload and / or short circuit, self-resetting.
- Soft Start - Soft Stop.
- Light intensity memory (except for mains interruptions of more than 0.2 sec.).
- Dissipated power 2W / A.
- Connection with terminal block.
Synchronized control: where it is necessary to manage a higher power, it will be possible to make a connection up to a maximum of 5 devices with synchronized control; this type of connection is possible only if all the synchronized LT 2 UN are powered on the same phase. The selection of the type of operation (Master / Slave) can be made via DIP 1. The selection must be made in the absence of mains voltage. Setting the minimum: Via DIP 2 it is possible to set the minimum operating level at a level of 10% or 20%. The selection must be made in the absence of mains voltage.
Reference: 119320
Three-phase rail adapter with 3-circuit. Compatible with all phase track. Allows the ' installation of dimmable floodlight.
Reference: 119772
Dimmable electronic transformer with 12 V with possibility of being regulated with IGBT for LED or halogen lamps.
Reference: 127032
MINI MD electronic dimmable power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 21W. Rated input voltage 240V. Power supply with ten-year warranty.
Reference: 127042
Dimmable electronic MICRO MD power supply with IGBT and TRIAC (TRAILING EDGE-LEADING EDGE) system in compact format, in direct current 500mA for a maximum power of 10W. Rated input voltage 240V. Power supply with ten-year warranty.
Reference: 127556
Electronic power supply adjustable from 250mA to 900mA in constant current and 12V-24V constant voltage. Multipower supply equipped with dip-switch with the selection of the output current. IP20 independent for indoor use. Dimmable through IGBT-TRIAC (TRAILING EDGE-LEADING EDGE) system.
Be the first to ask a question about this product!
Reference: 124385RH
Electronic dimmer with 230V input and 230V phase cut output. Power from 20W to 100W.
Reference: 162110
Recessed rotary dimmer available for different recessed series suitable for regulating dimmable LED bulbs of the best brands on the market.
Reference: 180426
Universal adjustable IGBT dimmer for 230 Vac MAX 400W LED lamps, for junction boxes.
Reference: 180429
PUSH / DALI dimmer converter, with push button control for LED lamps with DALI and DALI2 regulation.
Reference: 180427
Universal TRIAC pushbutton dimmer for LED lamps 230 V for standard 35 mm rail.
Reference: 162102
TCI Rondò electronic dimmer, dimmer with linear slider to adjust the intensity of LED or halogen lamps. It supports LED lamps from 4 to 100W and halogen lamps from 10 to 150W.